|
|
Products - Fibre Optic Splic Closure |
Fibre Optic Splice Closure manufactured by us is outstanding for its advantage such as reasonable structure, high quality material based on advanced formula, reliable and long-lasting sealing and good resealing performance for reuses, easy installing. The structure, technique, technical indicators and performance of our product keep ahead in China FOSC field and reach advanced international standard. Our product is well accepted for its stable quality, complete product series and quick response to customers.
|
| |
Bunchy (single fusion) GPJ-M Fiber Optic Splice Closure (FOSC) |
|
Model |
GPJ-M II |
Outside Dimension |
(LxWxH): 280mm x 200mm x 90mm |
Note |
GPJ-M is provided with one set of fixing device for 3 pieces of fiber cable inlet/outlet. (diameter for one fiber cable is Φ14mm and diameter for other two pieces of fiber cable is Φ12mm). If required, we could provide one set of fixing device for 4 pieces of fiber cable inlet/outlet（suit for single fiber with Max. diameter 12mm）or one set of fixing device for 2 pieces of fiber cable inlet/outlet instead（suit for single fiber with Max. diameter 14mm） |
Installation Accessories |
seal tape, aerial hanging hook or wall-mounting fixer, abrasive cloth, 1 piece of special wrench, earthing wire, nylon tie, labeling paper and desiccant. |
| |
Bunchy (single fusion)GPJ-E Horizontal Fiber Optic Splice Closure(FOSC) |
Model |
GPJ-E I, II, III, IV |
Outside Dimension |
(LxWxH): 450mmx216mmx110mm |
Note |
GPJ-E consists of one set of elastic integrated seal fitting with 6 inlet/outlet ports. Diameter of 2 ports is Φ23mm, diameter of other 2 ports isΦ20mm and diameter of the remaining 2 ports isΦ16mm.GPJ-EIII and GPJ-EIV can have 1-4 ribbon FOSTs with 3 pieces or 6 pieces of ribbon heat shrinkable protective sleeve per tray. 4 cores, 6 cores, 8 cores or 12 cores per ribbon heat shrinkable protective sleeve are available for customers’ selection.The following can be configured according to capacity of FOSC and number of cores of each
ribbon fiber of fiber cable to be actually installed.
● model and quantity of ribbon FOST
● quantity and number of cores of ribbon heat shrinkable protective sleeve. |
Installation Accessories |
|
| |
Bunchy (single fusion) GPJ-A Horizontal Fiber Optic Splice Closure(FOSC) |
 |
 |
Model |
GPJ-A I,II,III |
Outside Dimension |
(LxWxH): 410mm x 200mm x 120mm |
Note |
GPJ-A consists of one set of elastic integrated seal fitting with 6 inlet/outlet ports. Among these ports , diameter of 2 ports is Φ16mm, diameter of other 4 ports isΦ13mm.GPJ-A III can accommodate 1-4 ribbon FOSTs with 3 pieces of ribbon heat shrinkable protective sleeve per tray. 4 cores, 6 cores, 8 cores or 12 cores per ribbon heat shrinkable protective sleeve are available for customers’ selection.The following can be configured according to capacity of FOSC and number of cores of each
ribbon fiber of fiber cable to be actually installed.
● quantity of ribbon FOST
● quantity and number of cores of ribbon heat shrinkable protective sleeve.In this case, buffer tuber is necessary to be ordered,and can hold max.3 pieces of ribbon fiber. |
Installation Accessories |
seal tape, insulation tape, 3 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper and desiccant |
| |
Bunchy (single fusion) GPJ-J (GJS-H005)Horizontal Fiber Optic Splice Closure (FOSC) |
 |
 |
Model |
GPJ-J I, II |
Outside Dimension |
(LxWxH): 450mmx216mm x 160mm |
Note |
GPJ-J consists of one set of elastic integrated seal fitting with 6 inlet/outlet ports, diameter of 2 ports isΦ23mm, diameter of other 2 ports is Φ20mm and diameter of remaining 2 ports is Φ16mm.GPJ-J-II can have 1-6ribbon FOSTs with 6 pieces of ribbon heat shrinkable protective sleeve per tray. 4 cores, 6 cores, 8 cores or 12 cores per ribbon heat shrinkable protective sleeve are available for customers’ selection.The following can be configured according to capacity of FOSC and number of cores of each ribbon fiber of fiber cable to be actually installed.
● quantity of ribbon FOST
● quantity and number of cores of ribbon heat shrinkable protective sleeve.In this case, buffer tuber is necessary to be ordered and can hold max.3 pieces of ribbon fiber. |
Installation Accessories |
seal tape, insulation tape, 3 pieces of special wrenches, hanging hook, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper and desiccant. |
| |
Bunchy (single fusion) GPJ-G Dome Mechanical seal Fiber Optic Splice Closure(FOSC) |
 |
 |
Model |
GPJ-G I,II,III |
Outside Dimension |
(Height x Diameter): 390mm x 190mm |
Note |
GPJ-G consists of one set of elastic integrated seal fitting with 4 inlet/outlet ports suit for 1 pc of Max.Φ16mm fiber cable.GPJ-G-III can have 1-2 ribbon FOSTs with 6 pieces of ribbon heat shrinkable protective sleeve per tray. 4 cores, 6 cores, 8 cores or 12 cores per ribbon heat shrinkable protective sleeve are available for customers’ selection. The following can be configured according to capacity of FOSC and number of cores of each ribbon fiber of fiber cable to be actually installed.
● quantity of ribbon FOST
● quantity and number of cores of ribbon heat shrinkable protective sleeve.
In this case, buffer tube is necessary to be ordered and can hold Max. 3 pcs of ribbon fiber. |
Installation Accessories |
seal tape, insulation tape, 2 piece of special wrench, abrasive cloth, earthing wire, nylon tie, labeling paper, measuring paper and 1 set of metal hoop and desiccant |
| |
| Bunchy (single fusion) GPJ-P (GJS-D006) Dome Heat Shrinkable Fiber Optic Splice Closure(FOSC) |
 |
 |
Model |
GPJ-P I,II,III |
Outside Dimension |
(Height x diameter): 410mm x Ø190mm |
Note |
GPJ-P is provided with 4 inlet/outlet ports. Among these ports, 3 single inlet/outlet ports suit for single fiber cables with max. diameter Ø16mm and 1 mass inlet/outlet port suits for 1 piece of fiber cable with max. diameter Ø25mm or 2 pieces of fiber cables with max. diameter Ø21mm or multi-pieces of fiber cables with smaller diameter. Heat shrinkable fixing sleeve should be ordered in addition according to actual requirement (Heat shrinkable fixing sleeve is used to seal and fix fiber cable). GPJ-P allows for max. 3 pieces of small heat shrinkable fixing sleeve and 1 piece of big heat shrinkable fixing sleeve.GPJ-P while straight-through fiber cable is for branching application, fibers not cut off are for straight-through after being fixed and winded (1 mass inlet/outlet port is used in this case); fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable.GPJ-P III can have 1-4 ribbon FOSTs with 6 pieces of ribbon heat shrinkable protective sleeve per tray. 4 cores, 6 cores, 8 cores or 12 cores per ribbon heat shrinkable protective sleeve are available for customers’ selection. The following can be configured according to capacity of FOSC and number of cores of each ribbon fiber of fiber cable to be actually installed.
● model and quantity of ribbon FOST
● quantity and number of cores of ribbon heat shrinkable protective sleeve.In this case, buffer tube is necessary to be ordered and can hold max. 3 pieces of ribbon fibers |
Installation Accessories |
1 piece of special wrench, earthing wire, nylon tie, labeling paper, desiccant, aluminum-foil paper and 1 set of metal hoop. |
|
